Highly Efficient Slow-Release! 15T/Hour Sulfur-Coated Urea Production Line
The sulfur-coated urea production line focuses on the slow-release modification needs of conventional urea. Through a closed-loop process of "urea pretreatment - melt sulfur coating - cooling and solidification - finished product grading," it achieves large-scale production of 15 tons/hour of sulfur-coated urea. The finished granules use urea as the core and sulfur as the slow-release coating layer, combining the advantages of long-term nutrient release and environmental protection and energy saving. It is suitable for large-scale planting scenarios such as grain crops and cash crops, significantly improving fertilizer utilization. Production Line Configuration and Core Details I. Urea Pretreatment Unit: Laying the Foundation for Sulfur Coating (I) Raw Material Storage and Quantitative Feeding Urea Raw Material Silo: Equipped with two 50m³ conical raw material silos (total volume 100m³), made of carbon steel with an anti-corrosion coating. The silo cone angle is 65°, and a vibrator and star-shaped unloader are installed at the bottom to prevent urea granule bridging and blockage. The raw material silo is equipped with a pulse dust collector at the top to collect feed dust. The dust emission concentration is ≤10mg/m³, meeting environmental protection standards. Precision Feeding System: Two frequency-controlled belt feeders (model DTⅡ-500) are used, each with a feeding capacity of 7.5-8 tons/hour. Combined operation meets the production capacity requirement of 15 tons/hour. The feeders are equipped with weight sensors to provide real-time feedback on the feed amount. The speed is adjusted via a PLC system, with a batching error ≤±0.5%. (II) Urea Screening and Preheating Grading and Screening Machine: One Φ1.8×6.0 meter drum screen is used, employing a single-layer screen (pore size 2.5-4.5mm) to screen out uniformly sized urea particles (removing <2.5mm fragments and >4.5mm large pieces), ensuring uniform sulfur coating. Non-conforming particles are conveyed to a crusher via a return conveyor belt for crushing and recirculation, achieving a material utilization rate of 99% and a screening efficiency of 18 tons/hour. Low-temperature preheater: A Φ1.5×12 meter drum preheater is used, employing indirect steam heating to raise the temperature of urea particles from room temperature to 40-50℃. Preheating reduces the surface tension of the urea particles, facilitating the adhesion of the sulfur coating layer, while preventing rapid solidification of sulfur due to low-temperature urea, which would affect the continuity of the coating. The preheater is equipped with a temperature sensor, ensuring precise temperature control with an error ≤±2℃.
Click to Visit Site