What Is the Production Process of Organic Fertilizer?

1. Raw Material Pretreatment: Laying the Foundation for Fermentation Pretreatment is the first step, aiming to remove impurities and adjust material properties to create ideal conditions for microbial activity. Raw materials come from diverse sources, including livestock manure, crop straw, and food processing waste. These materials are screened to remove plastics and metals, then crushed into 5-10 mm particles to increase microbial contact area. Moisture content is adjusted to 55%-60% (a state where material holds together when squeezed but breaks apart easily), and the carbon-to-nitrogen ratio is balanced to 25:1-30:1 (e.g., by mixing chicken manure with straw), while pH is maintained at 6.5-7.5. To speed up fermentation, 0.1%-0.5% microbial inoculants like Bacillus subtilis can be added, shortening the cycle and reducing odors. 2. Microbial Fermentation and Decomposition: The Core Harmless Process Fermentation is the heart of organic fertilizer production, where microbial decomposition achieves harmless treatment and nutrient conversion. Pretreated materials are piled into long rows (2-3 meters wide, 1.2-1.5 meters high) and covered with breathable film for insulation and ventilation. Within 2-3 days, the pile temperature rises to 55-65°C, entering a high-temperature phase that lasts 5-7 days, effectively killing pathogens, insect eggs, and weed seeds. Regular turning (typically 4-6 times) is required to add oxygen, distribute heat evenly, and prevent temperatures from exceeding 70°C, which could harm microbes. After the high-temperature phase, the pile cools to ambient temperature over 7-10 days, with organic matter further converting into stable humus. Completion is indicated by dark brown color, no foul odor, loose texture, and compliance with hygiene standards (e.g., roundworm egg mortality ≥95%). 3. Post-Processing and Refinement: Enhancing Product Quality Decomposed coarse fertilizer undergoes refinement to meet commercial standards. It is first crushed and sieved to control particle size to 2-5 mm, ensuring uniformity. Then, tests are conducted for heavy metals, pathogens, and nutrient content (organic matter ≥30%, total nutrients ≥5%), which must comply with national standards. Depending on needs, granulation can be applied to produce pelletized fertilizer for easier storage and mechanical application, or additives like humic acid and micronutrients can be incorporated to enhance functionality. If the product has high moisture or odors, drying and deodorizing processes are used to reduce moisture to ≤15%.

Click to Visit Site